Three machines in a row will not drain
A shared drain line, not three failed pumps. That is a plumbing job and it is worth checking before anyone opens a machine.
Laundry Equipment
Commercial washer repair
In a laundromat every idle machine is lost revenue by the hour, and in a motel, salon or restaurant a dead washer stops the linen cycle that everything else depends on. Work covers fill and drain valves, drain pumps, bearings and seals, motors and inverters, door locks and boots, and control faults. The machine itself is serviced by distributors and manufacturer-authorized technicians. The water supply, the drain and the electrical circuit behind it are licensed trades and those are listed on this site.
Enter your ZIP to see the businesses listed for this trade nearest to your site, with their phone numbers.
- Free to searchno account, nothing to submit
- Public registersevery listing names its source
- License numberswhere the state publishes one
- Directyou call the business yourself
- Our estimate
- $180-$3,500
- Time on site
- 1-6 hrs
- Fault patterns covered
- 2
- Businesses listed
- None yet
What commercial washer repair costs
Most of these jobs land near $450. The full spread runs $180 to $3,500, and the gap between those two ends is diagnosis against replacement rather than one business being dearer than another.
What moves it: how much of the job is parts, whether the fault is found in the first hour or the third, access to the equipment, and the hour of the day you call. We never speak to the businesses listed here, so there is no rate card behind any of this. It is our own band for the category, and there is no regional index: the figure does not change with your metro.
| How soon you need it | Typical | Range |
|---|---|---|
| Scheduled visitBooked in advance, no urgency multiplier applied | $450 | $180 to $3,500 |
| Same dayOur band multiplied by 1.12 | $505 | $200 to $3,920 |
| Emergency calloutOur band multiplied by 1.35 | $610 | $245 to $4,725 |
Our estimate from national cost bands, not a quote from any business. Every row is the same band with the urgency multiplier the site applies everywhere else, so this table can never contradict the headline number. Ask for a written price before the work starts.
Who is licensed to do this work
No California classification covers this work, which is the honest answer rather than a gap in our data. The state licenses the supply behind a machine, the gas line, the exhaust duct, the refrigeration circuit and the electrical feed, and it does not license the machine. So there is no register row to read and no license number to print, and a page that offered you a plumber for it would be inventing the match.
Which trade covers which machineBefore you pay for a callout
Two minutes of checks that sometimes end the problem
We would rather you did not need a callout at all. These are the checks that end the most calls for this fault.
Try a quick fix first
Some issues resolve without a truck roll. Two minutes now can save the callout.
- 1
Check the supply valves and the drain before assuming the machine has failed. A blocked shared drain or a closed isolation valve takes out several machines at once and looks like a machine fault.
- 2
Write down the error code from the display. Commercial machines log faults and the code tells a technician which board or valve to bring.
- 3
Note whether one machine or several are affected. Several means supply, drain or power, all of which are licensed trades you can find here.
- 4
If the machine is still under a distributor service agreement, use it. Laundromat equipment is usually sold with one and it is easy to forget.
What the visit actually includes
- Fault code read and cycle diagnosis
- Valve, pump, belt or bearing replacement
- Door lock, boot and seal replacement
- Level and balance check after the repair
- Full test cycle before sign-off
Diagnosis
How washer faults usually present
Written from how these faults actually present on a working premises, not from a manual.
Bearing rumble on spin
Usually the beginning of an expensive repair. On an older machine the bearing job frequently costs more than the machine is worth, so get the replacement number too.
Listed for this trade
Businesses listed for washer
Read from public license registers, so there is no ranking here and no distance: this page has no location to measure from. Enter your ZIP to sort by who is nearest to your site.
No listings for washer yet
We have not imported a license register that covers this trade yet. When one lands the businesses appear here, and each listing carries the license number, the authority that issued it and a link back to the register entry.
By location
Commercial washer repair near you
Local pages show which businesses are listed for that metro, how far out they sit, and the local conditions that drive demand.
| Metro | Licensed for it |
|---|---|
| Washer in Los Angeles, CA | None yet |
| Washer in San Diego, CA | None yet |
| Washer in San Jose, CA | None yet |
| Washer in San Francisco, CA | None yet |
| Washer in Fresno, CA | None yet |
| Washer in Sacramento, CA | None yet |
| Washer in Bakersfield, CA | None yet |
| Washer in Stockton, CA | None yet |
| Washer in Riverside, CA | None yet |
| Washer in Santa Ana, CA | None yet |
| Washer in Modesto, CA | None yet |
| Washer in Santa Rosa, CA | None yet |
| Washer in Palmdale, CA | None yet |
| Washer in Salinas, CA | None yet |
| Washer in Visalia, CA | None yet |
| Washer in Santa Maria, CA | None yet |
| Washer in Ventura, CA | None yet |
| Washer in Chico, CA | None yet |
| Washer in Vista, CA | None yet |
| Washer in Merced, CA | None yet |
| Washer in Indio, CA | None yet |
| Washer in Redding, CA | None yet |
| Washer in Santa Barbara, CA | None yet |
| Washer in Napa, CA | None yet |
| Washer in Apple Valley, CA | None yet |
| Washer in Yuba City, CA | None yet |
| Washer in El Centro, CA | None yet |
Counted from the businesses we have imported for each metro center inside a 25 mile radius, and counting only those whose own license classification names this trade. General contractors licensed widely enough to take it on and subcontract it are excluded here, and still appear in a search. A metro reads “none yet” until we load a register that covers this trade there.
All coverage areasQuestions owners ask
Washer FAQs
Short, specific answers. If yours is not here, ask the business you call before you agree to the visit.
Why does this search return no businesses?
California has no contractor classification for commercial laundry equipment repair, so no state license register lists these technicians and we will not invent a match. Your equipment distributor is the usual route, and manufacturers publish authorized service agents by area. The plumbing, drain and electrical work behind the machines is licensed and it is listed here.
Which parts of a laundromat can I find on this site?
The water heater, the supply and drain plumbing, the electrical panel and circuits, the heating and cooling, the lighting, the security cameras and the dryer exhaust ducting. Everything except the machines themselves.
Repair or replace?
Valves, pumps, boots and controls are usually worth repairing. Bearings and drum damage on a machine past its expected life usually are not, and a distributor will quote both.
Related work
Often booked in the same visit
Batching jobs into one mobilization is the cheapest way to buy this kind of work.
DryerDryers not heating, tumbling but cold, long dry times and burner lockouts.from $180Dryer ventLint-choked ducts, long dry times, roof terminations and duct repairs.from $180Walk-in coolerCooler not holding temperature, iced coils, failed compressors and door seals.from $260Water heaterNo hot water, lukewarm supply, leaking tanks, pilot faults and tankless error codes.from $220
Laundry Equipment
Everything else in laundry equipment
Read next
How to check a California contractor license before you hire
Three minutes on the state's own lookup, what the result does and does not prove, and the two questions to ask on the phone.
7 min read
Walk-in cooler not getting cold: what to check first
Five checks that take ten minutes, plus the three readings a refrigeration tech needs before loading the truck.
7 min read
The two rooftop HVAC visits a year that pay for themselves
A spring cooling check and a fall heating check cost $340 to $700, and they are what stand between you and a $9,000 unit replacement.
6 min read
Ready when you are
Need washer sorted?
Search your ZIP to see the businesses listed for this trade nearest to your site, with the license numbers and phone numbers we hold, then call them yourself.
- Cost to search
- Free
- Account needed
- None
- Who you call
- The business